Hunting and other shootin' and reloading "stuff"
43 total photos Last updated on Thu, Apr 24 2008
This somewhat redundant view shows the cutter ready to cut - a stick of wire is inserted into the hole, stopped by the micrometer post and the cutter is cycled until the stick is cut into slugs. The plastic "tickler", which brushes the cut cores, thus eliminating any binding in the guied, is just visible - as viewed, at the right edge of the wire port. Once completed, this operation will require only starting the end of a roll, then coming back when the machine shuts off at the end of the spool . . . well, that's the DREAM! ;) Currently, the sticks are garvity fed, which works quite well. RG